 |
 |
 |
 |
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Switchbox Managed switching... ahead of its time! |
|
Features |
|
Intelligent
|
The switchbox can be programmed to alert you when any number of events occur. If the temperature goes above normal and the air conditioning is not adequate, or a radar sensor is tripped, the switchbox will alert the InfoControl software. You can choose whether to be notified via an SMS text message, Email, voice mail to your mobile phone, or a message to a pager. The possibilities are infinite. |
 |
||
|
Remote
|
The preset parameters in the switchbox can be changed «on the fly». You can update how the inputs and outputs react, and how they are assigned via the Internet, your mobile phone sending an SMS or via an answering machine. Flexibility at your fingertips. |
|
||
|
Relay
|
The switchbox activates devices attached to it via relays. How the relays react is based on instructions from timers, inputs and sensors. The relays can act as monostable or time based (i.e. on for 5 minutes, off for 10 minutes). They can be programmed to act as a group, with preset intervals between switching on a load to prevent exceeding current limits. Relays can be programmed to have delays, and support autoreverse functions. |
|
||
|
Infrared
|
The switching of devices attached to the switchbox can be controlled via an Infrared remote control. You can activate or deactivate devices in any part of a building from a central point using pre-programmed |
Copyright notice: |
||
| Switchbox Managed switching... ahead of its time! |
|
Technical specifications |
|
Electrical connections |
8 switched outputs (120V or (240V), 8 isolated inputs (12-48V or 110-220V) , 2 passive inputs |
|
||
|
Power source |
120V or 240V |
|
||
|
Max. load (Amps) |
10A (frame mounted version ) 6A enclosed version |
|
||
|
Power consumption |
7,5W / 35mA |
| |
||
 |
Environmental | Normal operating temperature: -10°C to +40°C. Relative humidity 90% |
|
||
|
Connectors | Two RJ12 connectors for control bus |
|
||
|
Indicators | Status LED, power LED, relay status LED (1 per relay), input LED (1 per input) |
|
||
Copyright notice:
Website and content: Copyright 2001, 2002 InfoByte AG *Microsoft is a trademark from
Microsoft Incorporation *InfoControl is a trademark from InfoByte AG.
Technical specifications are subject to change without prior notice.
| Switchbox Managed switching... ahead of its time! |
The heart of the InfoControl systems The switchbox reacts to the parameters you have set to manage conditions in your home or building. |
|
The illustration to the left shows the switchbox model used for mounting in a distribution frame. ( Max. load 10A ). |
Inputs from sensors are compared with the "states" you have defined and the switchbox relays will be energised accordingly. |
|
Due to its innovative architecture and programmable capabilities, you can easily add 3rd party components and switches. |
Also available is a covered version (left) which can be used in an environment where protection is required for safety reasons. ( Max. load 6A ) |
PC to be switched on all the time unless you have multiple PC bus converters, infrared devices, Web and mail based services. |
Copyright notice:
Website and content: Copyright 2001, 2002 InfoByte AG *Microsoft is a trademark from
Microsoft Incorporation *InfoControl is a trademark from InfoByte AG.
Technical specifications are subject to change without prior notice.
|
||||||||
